RC-Monster Forums - View Single Post - how to reverse a servo in this application?

J57ltr · 02.23.2011, 03:49 PM

I think that would not work because the feedback would be looking for it to be in another position. It would be like having your steering servo reversed on your radio and as you take off it drifts a little left so you turn right and it goes further left so you add more right until you slam into the retaining wall. (like I did drag racing).

It would make more sense to switch the 1 and 3 terminals on the pot, since it's the feedback device, I think.

Jeff

	(#5)
J57ltr RC-Monster Aluminum Offline Posts: 610 Join Date: Feb 2009 Location: Tomball/ Houston Tx.	02.23.2011, 03:49 PM I think that would not work because the feedback would be looking for it to be in another position. It would be like having your steering servo reversed on your radio and as you take off it drifts a little left so you turn right and it goes further left so you add more right until you slam into the retaining wall. (like I did drag racing). It would make more sense to switch the 1 and 3 terminals on the pot, since it's the feedback device, I think. Jeff The Warnings & Cautions discussed in this manual cant cover all possible conditions/situations. It must be understood that common sense and caution are factors which cant be built into this product.