RC-Monster Forums - View Single Post

lincpimp · **Spektrum / JR servo issue -** 03.10.2011, 05:14 PM

Having a strange problem with a dx6/ar6000 radio system. It does not like jr servos, namely 9100t and 8711. I have 2 of each of these servos and all 4 of them will make the receiver shut down, then restart. Does not matter if there is any load on the servo, or what channel you plug it into.

I have tried other hitec and futaba servos and they work just fine.

I am using a ccbec with a 2s lipo. Lipo is charged and the ccbec is not shutting down.

Seems like it is a signal issue, or the jr servos are putting out some sort of interference?

I tried unplugging everything from the rx save for the ccbec and the jr servo, but the problem still exists. I can unplug the jr servo and everything works as normal...

Any ideas?

	(#1)
lincpimp Check out my huge box! Offline Posts: 11,935 Join Date: Aug 2007 Location: Slidell, LA	Spektrum / JR servo issue - 03.10.2011, 05:14 PM Having a strange problem with a dx6/ar6000 radio system. It does not like jr servos, namely 9100t and 8711. I have 2 of each of these servos and all 4 of them will make the receiver shut down, then restart. Does not matter if there is any load on the servo, or what channel you plug it into. I have tried other hitec and futaba servos and they work just fine. I am using a ccbec with a 2s lipo. Lipo is charged and the ccbec is not shutting down. Seems like it is a signal issue, or the jr servos are putting out some sort of interference? I tried unplugging everything from the rx save for the ccbec and the jr servo, but the problem still exists. I can unplug the jr servo and everything works as normal... Any ideas? Alot of Savage parts for sale!!!