RC-Monster Forums - View Single Post

whitrzac · 03.18.2011, 06:29 AM

link fail...

I trust my "homemade junk" over most of the power supplies at amain. I saw one of the older protec(?) ones with the red front panel overheat and nearly catch fire...

my "homemade junk" are used in servers that have $10000000000000000000000000 of dollars worth of info on them...

If you would like, I have a few power supplies similar to the HP one listed, except they are 50+ amps at 120v and 100+ at 240, all in a box that is smaller than most of the 20 amp ones at amain...I usually do 4 outputs, and all of the contacts are covered with black silicone. I charge $40 local for them, and shipping would be $15ish....

I use this charger...
http://www.amainhobbies.com/product_...er-6S-10A-250W

	(#3)
whitrzac Can't catch this... Offline Posts: 1,142 Join Date: Oct 2008 Location: baraboo, WI	03.18.2011, 06:29 AM link fail... I trust my "homemade junk" over most of the power supplies at amain. I saw one of the older protec(?) ones with the red front panel overheat and nearly catch fire... my "homemade junk" are used in servers that have $10000000000000000000000000 of dollars worth of info on them... If you would like, I have a few power supplies similar to the HP one listed, except they are 50+ amps at 120v and 100+ at 240, all in a box that is smaller than most of the 20 amp ones at amain...I usually do 4 outputs, and all of the contacts are covered with black silicone. I charge $40 local for them, and shipping would be $15ish.... I use this charger... http://www.amainhobbies.com/product_...er-6S-10A-250W