RC-Monster Forums - View Single Post

J57ltr · 03.21.2011, 11:24 PM

Ok so I figured I would give it a try. My setup doesn't lend itself to this type of testing, but it at least shows that it does work.

I used my Rustler running a MMM and a Fine Design 6 turn slotless 2 pole motor, 2S2P A123 battery. Braking isn't very good, and the added weight of the DMM didn't help. The meter I use is a Fluke 112 DMM. The battery pack was not fully charged it was as I pulled it from the drawer.

	(#1)
J57ltr RC-Monster Aluminum Offline Posts: 610 Join Date: Feb 2009 Location: Tomball/ Houston Tx.	03.21.2011, 11:24 PM Ok so I figured I would give it a try. My setup doesn't lend itself to this type of testing, but it at least shows that it does work. I used my Rustler running a MMM and a Fine Design 6 turn slotless 2 pole motor, 2S2P A123 battery. Braking isn't very good, and the added weight of the DMM didn't help. The meter I use is a Fluke 112 DMM. The battery pack was not fully charged it was as I pulled it from the drawer. Attached Thumbnails The Warnings & Cautions discussed in this manual cant cover all possible conditions/situations. It must be understood that common sense and caution are factors which cant be built into this product.