View Single Post
FS: 1/16 E-Revo with Neu 1112/2D and Mamba Max and 4S Lipos + Charger
Old
  (#1)
BP-Revo
BMW M Power!
 
BP-Revo's Avatar
 
Offline
Posts: 1,910
Join Date: Jan 2006
Location: SoCal
FS: 1/16 E-Revo with Neu 1112/2D and Mamba Max and 4S Lipos + Charger - 03.31.2011, 09:14 AM

Downsizing my collection. Have not touched any of my RC's in over 2 years and photography is an expensive hobby so I need funds for that.

First off, this little truck is an absolute MISSILE!!! I have never been able to max this thing out. Stupid fast is a very good way to describe this.

I've ran it less than 10 times. This thing runs very cool. After a full pack the motor is ice cold and ESC is luke warm.

The truck has quite a few upgrades, including:

1/16 E-Revo VXL
Neu 1112/2D Motor
Mamba Max ESC
Castle BEC
Traxxas Hard Anodized Shock Bodies and TiNi Shock Shafts
Tubes Toe Links
Aluminum Push Rods
Stiffer Springs
4 Pairs of 2200mah 4S 20C Zippy Batteries
Charger

I spent over $600 to build this thing.

Here are the other included accessories:

2nd Set of Tires. Pro-Line HoleShots (they are the exact same diameter as the stock tires - I only ran them once)
Lipo Charger - Charges two packs (one full set) at once
Original Manual
Left over stickers, DVD, and other paperwork that came with the truck.
Stock Springs
Factory RX Box if you want a sealed RX.
Original Box

Hi-Res Pictures:



















To run it you will need:

Radio and a receiver (Spectrum Receiver in pictures is not included)

PM for price.

Thanks!

BP


BL Revo: CF G2R, LMT1940/7, 6S FP 30C Lipos, MMM, Hitec 5955TG
CRT .5: 7075 Ext Chassis, LMT1930/7, FP 25C 3S Lipos, MM