|
04.10.2011, 12:33 PM
Hey guys, just an update...the 3800kv motor in an scte geared 15/40 is def. The sweet spot...great top end, great acceleration, and best of all, I ran back to back 2s 65C 5600mah protek's and the motor topped out at 155...:). I figured out why I was running so hot and it turned out that I was spinning my wheels too much and not getting enough traction , lol. Ive tried the 4.5 and 5.5 HV motors both with and without the 14mm tuning rotor and they both either got too hot or didn't have as much torque as I'm used to....i also tried the 2650kv 1512 cc/Neu and it worked fine as well, however, just make sure you have good lipos BC my 2s 5000mah 40c venoms had a hard time accelerating the truck from a dead start and bringing the nose down during jumps...but my protek's had zero issues .....hope this helps..
Losi SCTE
MMP/1410 3800kv
2s 65C 5600mah proteks
Dx3s
|