RC-Monster Forums - View Single Post

E-Revonut · 05.12.2011, 05:06 AM

There is no problem removing the switch as long as you don't do it at the circuit board. I have removed most of my switches by cutting the wires about 1" from the case twist them and solder then shrink wrap it. I have had to send in a couple like this and have never had issues with the warranty.

	(#3)
E-Revonut RC-Monster RC8T Offline Posts: 2,554 Join Date: Jan 2008 Location: Syracuse, New York (Camillus)	05.12.2011, 05:06 AM There is no problem removing the switch as long as you don't do it at the circuit board. I have removed most of my switches by cutting the wires about 1" from the case twist them and solder then shrink wrap it. I have had to send in a couple like this and have never had issues with the warranty. RC-Monster RC8T 1515 2.5D/MMM/5s RC-M 4500mah SC10 MMPro 13.5T 2s NeuEnery 5000mah RC18T Mamba 25/5400kv 2s lipo + 6s NiMh