I was so tired yesterday I wasn't in the mood to post here... Anyway, yesterday I woke up at 8AM, started working on my bike at 9AM. The first thing I started to do was drilling out the bore of the motor sprocket to 12mm, it was very hard steel so it took me some time. The result? Horrible.
The hole I drilled was not in line, the sprocket is useless. At afternoon my dad came to help me, as a lot of things are almost impossible to do alone. My goal was to make just a little ride on the bike, so I wasn't working very secure and solid as I had little time left. It was 9PM at that time and I started ductaping all things together, I was very tired. Even though the sprocket wasn't drilled in line, I still placed it on the motor as I just wanted to see this thing turn. In the mean time I concluded that if I would make a test ride, the battery box could fall off, the chains will probably flying everywhere etc. So my goal changed to power up the motor on the bike. At about 10PM the bike was completely assembled... I plugged in the batteries while my dad was holding up the rear wheel, twisted the throttle a little and the motor started running, all the sprockets were running, everything worked like it should do. Wow, I'll never forget that smile on my face at that moment, it was so big! :mrgreen: That feeling I had... goosebumps... just because the rear wheel was running by motor, oh damn that was great! hehe If I would have make a test ride something would have been damaged probably, so I decided not to do that. It will take some time to make everything perfect before I make my first testride. I just want to have everything very solid and perfect. Anyway, a pic how the bike looked yesterday night:



After that I went to sleep and waked up today at 1PM lol, I'm 1 hour awake now. In a few days I go on holiday again, so it might take a few weeks till I make my first testride :(