RC-Monster Forums - View Single Post

Tat2 · 04:45 PM

It comes from the specs that TRX lists in the manual.

"VXL-3s Specifications:
Input voltage: 4.8 - 11.1V (4 - 9 cells NiMH or 2S - 3S LiPo)
Supported motors: Brushed / Brushless / Sensorless brushless
Motor limit: None
Continuous current: 200A
Peak current: 320A
BEC voltage: 6.0V DC
Transistor type: MOSFET
On-resistance: 0.00075 Ω Max (0.006/8 FETs)
PWM frequency: 12,000Hz
Battery connector: Traxxas High-Current Connector
Motor connectors: TRX 3.5mm bullet connectors
Motor/battery wiring: 12-gauge Maxx® Cable
Thermal protection: 2-stage thermal shutdown
Case size (l/w/h): 55mm (2.19")/ 39mm (1.54")/ 33mm (1.3")
Weight: 109g (3.84oz)"

	(#3)
Tat2 RC-Monster Stock Offline Posts: 12 Join Date: Jun 2010 Location: Harm City	08.06.2011, 04:43 PM It comes from the specs that TRX lists in the manual. "VXL-3s Specifications: Input voltage: 4.8 - 11.1V (4 - 9 cells NiMH or 2S - 3S LiPo) Supported motors: Brushed / Brushless / Sensorless brushless Motor limit: None Continuous current: 200A Peak current: 320A BEC voltage: 6.0V DC Transistor type: MOSFET On-resistance: 0.00075 Ω Max (0.006/8 FETs) PWM frequency: 12,000Hz Battery connector: Traxxas High-Current Connector Motor connectors: TRX 3.5mm bullet connectors Motor/battery wiring: 12-gauge Maxx® Cable Thermal protection: 2-stage thermal shutdown Case size (l/w/h): 55mm (2.19")/ 39mm (1.54")/ 33mm (1.3") Weight: 109g (3.84oz)" Sometimes you have to cross the line to figure out where it is. Last edited by Tat2; 08.06.2011 at 04:45 PM.