RC-Monster Forums - View Single Post

simplechamp · 08.10.2011, 05:58 PM

Ultimately you want the caster to be low, like 0-10 degrees. Even if you removed the kick-up in the chassis (about 7 degrees) the c-hubs are where the majority is, about another 15 degrees. The IGT and my Jammin GT conversion are both like this. The Jammin caster can be reduced by 2 degrees using an optional lower hingepin holder, but it's not nearly enough.

I have been looking for ways to solve it, and haven't found anything short of getting some custom alloy c-hubs made that have no caster.

	(#6)
simplechamp RC-Monster Titanium Offline Posts: 1,884 Join Date: Jul 2009	08.10.2011, 05:58 PM Ultimately you want the caster to be low, like 0-10 degrees. Even if you removed the kick-up in the chassis (about 7 degrees) the c-hubs are where the majority is, about another 15 degrees. The IGT and my Jammin GT conversion are both like this. The Jammin caster can be reduced by 2 degrees using an optional lower hingepin holder, but it's not nearly enough. I have been looking for ways to solve it, and haven't found anything short of getting some custom alloy c-hubs made that have no caster. Caster Fusion F8T - Serpent 811Be - Jammin X2 carbon e-GT conversion - Axial SCX10