RC-Monster Forums - View Single Post - The start of something new. Vintage TRX-1 build.

crazyjr · 08.27.2011, 04:46 PM

If i could make a couple suggestions,The stock slipper is dated and never worked right. I had an SRT that i built to race, I used a VXL slippershaft and old school mods inside the tranny, delrin top/aluminium idler/delrin diff. the plastic top gear fits the same on the modern shaft, handled 2s and 3s all day every day without fail. I'm pretty sure the top and idler are the same on all traxxas rustler based buggies or trucks

	(#12)
crazyjr RC-Monster Dual Brushless Offline Posts: 3,794 Join Date: May 2005 Location: georgia	08.27.2011, 04:46 PM If i could make a couple suggestions,The stock slipper is dated and never worked right. I had an SRT that i built to race, I used a VXL slippershaft and old school mods inside the tranny, delrin top/aluminium idler/delrin diff. the plastic top gear fits the same on the modern shaft, handled 2s and 3s all day every day without fail. I'm pretty sure the top and idler are the same on all traxxas rustler based buggies or trucks Work because i gotta, play because i wanna People here hate Nitro, I love it. I start it, run it about 50 ft from me and it dies, I go after it. Perfect exercise