RC-Monster Forums - View Single Post

snellemin · 09.29.2011, 11:34 AM

I melt the ends of the braid wires with my soldering iron. Doesn't fray after that. I use the heat shrink just to make it look pretty. About the caps

; 4 caps are for the Rspro to keep it running cooler. I also put a heatsink on the bottom fets a while back. The big cap is for the sorry little rx that works with my React.

	(#3)
snellemin 2 KiloWatt RACER Offline Posts: 2,496 Join Date: May 2007 Location: Houston	09.29.2011, 11:34 AM I melt the ends of the braid wires with my soldering iron. Doesn't fray after that. I use the heat shrink just to make it look pretty. About the caps ; 4 caps are for the Rspro to keep it running cooler. I also put a heatsink on the bottom fets a while back. The big cap is for the sorry little rx that works with my React. 6 KiloWatt A123 Racer GTP-Pletty Big Maxximum+RX8. GTP-C50-6L Hacker+RX8. CRT.5-Pro4+ZTW esc. 24s2p EVG SX 49.6mph Ebike. 18s4p Raptor 60mph Ebike. 11.5KW