RC-Monster Forums - View Single Post

aqwut · 02.16.2012, 11:47 PM

I had to remove a water cooling jacket off of a 2280, and it was "HELL". I drilled a hole on a 1/4" plate of steel, and drilled another 10mm hole on another 1/4" plate of steel. Then I used 2 big "C" clamps to remove. (Do it very slowly. Also used shock oil on the outside of the can, and some on the inside of the water jacket. I ended up damaging both of the o-rings on the water jacket.

	(#1)
aqwut Brushless Heavy Weight.... Offline Posts: 1,954 Join Date: Sep 2005 Location: Kingsville, Ontario	02.16.2012, 11:47 PM I had to remove a water cooling jacket off of a 2280, and it was "HELL". I drilled a hole on a 1/4" plate of steel, and drilled another 10mm hole on another 1/4" plate of steel. Then I used 2 big "C" clamps to remove. (Do it very slowly. Also used shock oil on the outside of the can, and some on the inside of the water jacket. I ended up damaging both of the o-rings on the water jacket. The Power of BRUSHLESS!!!!! http://www.geocities.com/aqwut 1HP (electric) = 746 Watts. Everything is brushless!!