RC-Monster Forums - View Single Post

magman · 08:41 PM

If all you have is a 2650 on 6S you really need to be careful with gearing...my suggestion is get the correct motor for your application and it will help tremendously. On 6S a 1400kv Tekin motor would be perfect and probably run cooler and more efficient with proper gearing

Having the correct motor/batt/esc combo is a huge reason why people either have success or have problems. It took me awhile to figure all that out and it ended up costing me a couple of motors and esc because I did not take the advice of many guys here. Better to buy the correct motor for the amount of cells you are using....makes a huge difference

	(#4)
magman RC-Monster Dual Brushless Offline Posts: 4,236 Join Date: Dec 2007 Location: Cape Cod, Mass.	03.05.2012, 08:38 PM If all you have is a 2650 on 6S you really need to be careful with gearing...my suggestion is get the correct motor for your application and it will help tremendously. On 6S a 1400kv Tekin motor would be perfect and probably run cooler and more efficient with proper gearing Having the correct motor/batt/esc combo is a huge reason why people either have success or have problems. It took me awhile to figure all that out and it ended up costing me a couple of motors and esc because I did not take the advice of many guys here. Better to buy the correct motor for the amount of cells you are using....makes a huge difference 1. MBX-6 T8 1900KV, RX8 ON 4S 2. MBX-5T 1520, MMM ON 5S 3. MBX-5 ONROAD CONVERSION 1515, MMM ON 5S 4. MRX-3 ON ROAD CONVERSION 1512, MMM ON 6S 5. TEN T 2650 T8, MMP ON 3S Last edited by magman; 03.05.2012 at 08:41 PM.