Quote:
Originally Posted by BADBOY2
oh ok so i dont need it then..
@nick do you use BEC ?i hope not..heres what im gonna be having on the rc8be:
rx8 wit 1900kv CC.
batteries are 14.8v 4s 5000mah steering servo is the hitec 333oz. do i need something else ?im looking at the pix and there 5 poles on the esc..3 for the wires and the 2 in between it says battery?
thanks guys for the replies!!!
|
I do not run at BEC at this time.
I'm running a Tekin 1900kv combo in my Ten-T and a Tekin 2000kv combo in my D8T, both without a BEC.
If it were me I would sell that castle motor and buy a similar Tekin motor so I could utalize the sensored mode. Once I ran a Tekin esc/motor combo I never wanted to run a sensorless setup again.
1900kv or 2050kv for a buggy
2000kv for a truggy on 4s.
Good luck,
Nick