RC-Monster Forums - View Single Post

Kcaz25 · 09:29 PM

I will upload those pics but in the meantime...
I now have a very nice 8mm truetrac system that fully articulates in suspension. I did use the stub axles after all and when I post more pics I'll tell more about how I did it.

And I do now know that the Losi 8t 2.0 shafts will work on the front( or simply standard 3.3spec) suspension but will have to have spacers on the stub portion to take up the slack between the knuckle and the hex adapter. Even up to 4mm possible.

I may just leave the front with the TRX shafts that I already have which work great on standard suspension.

I will post pics of this as well perhaps on tues.

Also, I don't know if I've mentioned it but I'll be going back to standard UE knucklhead towers and longer UE or Proline shocks instead of buggy shocks and short towers.

-Zack

	(#593)
Kcaz25 RC-Monster Titanium Offline Posts: 1,419 Join Date: Dec 2008 Location: Louisville, KY	03.24.2012, 09:28 PM I will upload those pics but in the meantime... I now have a very nice 8mm truetrac system that fully articulates in suspension. I did use the stub axles after all and when I post more pics I'll tell more about how I did it. And I do now know that the Losi 8t 2.0 shafts will work on the front( or simply standard 3.3spec) suspension but will have to have spacers on the stub portion to take up the slack between the knuckle and the hex adapter. Even up to 4mm possible. I may just leave the front with the TRX shafts that I already have which work great on standard suspension. I will post pics of this as well perhaps on tues. Also, I don't know if I've mentioned it but I'll be going back to standard UE knucklhead towers and longer UE or Proline shocks instead of buggy shocks and short towers. -Zack Last edited by Kcaz25; 03.24.2012 at 09:29 PM.