RC-Monster Forums - View Single Post

sjcrss · 04.02.2006, 08:09 AM

I've been running this setup for well over 5 years...I originally purchased this motor and controller setup...back in the day when Maximizer products was carrying BK stuff......back then I purchased a 1895 Micro controller with a 1920/8 lehner motor......I'm still running this motor today.....of which has more than enough torque and speed for me ...as for the controller...somehow last spring I managed to send 123 amps...thru the controler and fried it..according to BK....so I sent it in and they replaced it with a 2095 micro controller for about $150.00......Needless to say I was very happy...All I'm saying is while you want all this speed and torque...you might be spending alot of money and will continue to break stuff.....or your emaxx...might be so uncontrollable it isn't any fun at all......listen to some of the recomendations and pick something realitivly reasonable to what you want and have fun.....just my .02 worth....

ps...my emaxx....is geared the following..

13t pinion/66t spur
1920/8 lehner...2095 micro bec
12 cells matched in series....3300 nimh GP cells
8 spyder UE diffs
Gen II Ultramaxxed tranny gears....spare set of Gen III's if needed

If any one has any other Q's about my set up...just ask...

	(#40)
sjcrss Hyper 7 Erevo Center Diff Offline Posts: 1,195 Join Date: Dec 2005 Location: CNY (Syracuse/Binghampton area)	04.02.2006, 08:09 AM I've been running this setup for well over 5 years...I originally purchased this motor and controller setup...back in the day when Maximizer products was carrying BK stuff......back then I purchased a 1895 Micro controller with a 1920/8 lehner motor......I'm still running this motor today.....of which has more than enough torque and speed for me ...as for the controller...somehow last spring I managed to send 123 amps...thru the controler and fried it..according to BK....so I sent it in and they replaced it with a 2095 micro controller for about $150.00......Needless to say I was very happy...All I'm saying is while you want all this speed and torque...you might be spending alot of money and will continue to break stuff.....or your emaxx...might be so uncontrollable it isn't any fun at all......listen to some of the recomendations and pick something realitivly reasonable to what you want and have fun.....just my .02 worth.... ps...my emaxx....is geared the following.. 13t pinion/66t spur 1920/8 lehner...2095 micro bec 12 cells matched in series....3300 nimh GP cells 8 spyder UE diffs Gen II Ultramaxxed tranny gears....spare set of Gen III's if needed If any one has any other Q's about my set up...just ask...