Quote:
Originally Posted by brijar
If you buy that pinion, you shouldn't need a converter since it appears to already have a 6mm shaft which is what the stock Traxxas sliders use. If it were an 8mm shaft the whole way, you would need Mike's adapter.
|
Yeah but the pinion does not have a straight through hole, so the cross pin/set screw on the shaft will not work. That's why I think the RC monster Revo adapter is needed.
Suicideniel, are you sure? I will look it up tomorrow some more, but I was sure that their are more than one.
Paralyzed, thanks for the info on the shimming method. I will have to put these things together when I get the V1 cases.
For the center diff, I was thinking of either using a plastic center diff mounts and use some aluminum angle to mount to the chassis. OR use Mike's UNIVERSAL center diff/motor mount somehow. I could prob situate the center diff to at least ONE truggy CVD, and then use Mike's Revo shaft adapter, preferably for the front. I shall see.