RC-Monster Forums - View Single Post

florianz · 08.13.2012, 04:59 PM

you should check if all the wires are ok, and that there are no other reasons for your problem. Long time ago I have added a cap to the rx system, no problems whatsoever. they are cheap, so go for it, for wiring take some old servo-wires. I don't know exactly the specs of mine, just have a big one.

Some servos are very hungry for power, so that can affect the rx. Further, some bec's arent tat strong. Probably the MMM's BEC isn't that great. You can add an UBEC, there are some good ones out there, which aren't expensive at all. Some of the turnigy/hobbyking are ok, but not all of them.

My Savox Servo is definately stronger and faster (almost too much) with the ubec, compared to the bec of the Hobbywing ESC.

which RX system do you have?

	(#2)
florianz RC-Monster Carbon Fiber Offline Posts: 354 Join Date: Sep 2008 Location: Hamburg, Germany	08.13.2012, 04:59 PM you should check if all the wires are ok, and that there are no other reasons for your problem. Long time ago I have added a cap to the rx system, no problems whatsoever. they are cheap, so go for it, for wiring take some old servo-wires. I don't know exactly the specs of mine, just have a big one. Some servos are very hungry for power, so that can affect the rx. Further, some bec's arent tat strong. Probably the MMM's BEC isn't that great. You can add an UBEC, there are some good ones out there, which aren't expensive at all. Some of the turnigy/hobbyking are ok, but not all of them. My Savox Servo is definately stronger and faster (almost too much) with the ubec, compared to the bec of the Hobbywing ESC. which RX system do you have?