[millzee]

Done!!!
I ran out of free time to drive for too long but from what I've seen so far I like the truck and look forward to hitting the moto x track. I used a Mr 3000 so I plugged the brake servo into the 2nd throttle input an adjusted it so it runs free until the servo pulls the mech brakes into play, I have the front a little tighter than the rear atm and the brake setting on the esc at 40% and it pulled up well after some fine tuning on the tx, trust me, when this thing is doing 70kph toward you and you jam the brakes on it brings a rush of blood to the system for that split second when you think you may have two broken legs, lol. I ran for around 20 minutes including adjustments, a few speed runs and a few donuts/ playing in the dirt and the packs only half empty, temps where all good but we'll see how things go at the track. Weight distribution seems to be ok at this point after a few throttle punches over the speed humps in the park but I want heavier springs before I'll jump it too big.
I'll try getting some video soon but I have the bowls open on Saturday and a bloke has entered me in a tournament on Sunday so this week ends out, I might have to get out of work one day this week, damn good weather!!