RC-Monster Forums - View Single Post - Center diff in G2. Problems with fitting UE GenIV servo saver.

gumleguf · 10.20.2012, 01:48 PM

Today's progress. Had some 16x12x1 shims made and ended up needing 4 of them. The center diff sits tight and near perfect now. The only thing I didn't have was four 24-26mm screws for the center diff mounting plate - could only find three old screws of different lengths. If needed I could still lower the center diff 2-3mm but at the moment 8mm is enough I think.

	(#3)
gumleguf RC-Monster Carbon Fiber Offline Posts: 226 Join Date: Jan 2012 Location: Northern Europe	10.20.2012, 01:48 PM Today's progress. Had some 16x12x1 shims made and ended up needing 4 of them. The center diff sits tight and near perfect now. The only thing I didn't have was four 24-26mm screws for the center diff mounting plate - could only find three old screws of different lengths. If needed I could still lower the center diff 2-3mm but at the moment 8mm is enough I think.