RC-Monster Forums - View Single Post

Thirdgen89GTA · 05:00 PM

Well. I can't take any credit. And I haven't even received it yet. But the conversion looks ridiculously easy. Might try to do some cooling stuff though to quiet it down, maybe a small LCD temp display.

Could also use the 12v rail to feed a fan and use a Rheostat to control temps Every PC fan I've ever seen was designed to run on 12v so you could find one that fits the cooling needs without sounding like a 747 and just power it off the 12v while sending the yellow wire to the RPM sensor in the PSU.

	(#5)
Thirdgen89GTA You can sleep in a car, but you can't race a house Offline Posts: 311 Join Date: Mar 2007 Location: Buffalo Grove, IL	01.04.2013, 11:00 AM Well. I can't take any credit. And I haven't even received it yet. But the conversion looks ridiculously easy. Might try to do some cooling stuff though to quiet it down, maybe a small LCD temp display. Could also use the 12v rail to feed a fan and use a Rheostat to control temps Every PC fan I've ever seen was designed to run on 12v so you could find one that fits the cooling needs without sounding like a 747 and just power it off the 12v while sending the yellow wire to the RPM sensor in the PSU. 1989 Pontiac TransAm GTA, 5.7L LT1/M6 400rwhp+ Jammin X1 CRT Pro, MMM/1717, 6S Hyper One Seven 1/7th scale GT car, MMM/1717, 6S Hyper 10TT, MMP/1410, 3S TL Mini 8ight, stock, 2S Last edited by Thirdgen89GTA; 01.04.2013 at 05:00 PM.