RC-Monster Forums - View Single Post

_paralyzed_ · 01.12.2013, 03:31 PM

It would work fine. Most do run the 1515, but basic rules apply anytime you change a setup. Gear for a realistic speed, like around 40-45mph, and check temps often during initial runs. Your temps will dictate whether you are over geared or not.

The neu is a better manufactured motor, but honestly your current motor is as powerful or more powerful than the neu. It would be a more expensive motor, but not really any better performing.

It will work, if you want to try a neu get it, but you've got a good set up.

	(#2)
_paralyzed_ working on a brushless for my wheelchair..... Offline Posts: 4,890 Join Date: Mar 2007 Location: minnesnowta	01.12.2013, 03:31 PM It would work fine. Most do run the 1515, but basic rules apply anytime you change a setup. Gear for a realistic speed, like around 40-45mph, and check temps often during initial runs. Your temps will dictate whether you are over geared or not. The neu is a better manufactured motor, but honestly your current motor is as powerful or more powerful than the neu. It would be a more expensive motor, but not really any better performing. It will work, if you want to try a neu get it, but you've got a good set up. _______________________________________ It's "Dr. _paralyzed_" actually. Not like with a PhD, but Doctor like in Dr. Pepper.