View Single Post
Old
  (#13)
Jasper
RC-Monster Carbon Fiber
 
Offline
Posts: 116
Join Date: Aug 2005
04.06.2006, 12:23 PM

Thanks guys. I really like this motor :027:

I want to know how the motor will handle 16, GP3300 cells. So I placed the motor in my 1/8 buggy. The gearing was 46/12. I also added a wing mount and mounted the ofna 9.5 springs at the rear.

This motor ROCKS :017: The torque of this motor is massive. I drove the buggy for at least 20 minutes hard. Straight on the road in front of my house and on the grass. After 20 minutes the batterys were still full! And the power was almost the same than at the beginning. Then a couple of friends dropped by so I talked and drove a little bit. But not so hard. Then I helped a friend to walk his commercial papers. So I drove for one hour in the neighboorhoud with the truck. But very slowly.

So after 90 the minutes the battery's were empty! With 20 minutes hard driving and the other 70 slow/mid. This is very impressive!

The motor was getting less than hand-warm. So I can gear higher. I am going to buy some IB3800. Then the run time and the speed will be sick :017:
Attached Thumbnails
Click image for larger version

Name:	spoiler.jpg
Views:	47
Size:	54.4 KB
ID:	1039   Click image for larger version

Name:	buggy rechtsvoor.jpg
Views:	97
Size:	65.0 KB
ID:	1040  
   
Reply With Quote