Well, the car is almost done.
The steering servo posts are the original ones I cut out of the MT4 G3 plastic cage. RC Box is from a Traxxas XO-1.
The ESC is mounted to the chassis plate as on the XO-1, but I'm not really happy with all that plastic, I think I will put everything in some Epoxy later.
Weight with 6s 5300mah battery, Body and HPI Phaltlines is 5303g, with Traxxas XO-1 wheels 4879g.
Gearing is 46/21, with XO-1 wheels and 6s with 3.7V that's 80km/h or 102km/h with Phaltlines.
Did a testrun yesterday, well, what can I say, the wheels take 0.5 seconds to accelerate from zero to 50mph, just the car has problems keeping up with that
. Total driftmachine, but drives very well and controllable.
Motor was about 60 degress celsius after 15 minutes, I need to put a fan on it ...
