RC-Monster Forums - View Single Post - new CC 2200 in older 4906 e-maxx, have setup questions please advise

Justinbolin · 06.10.2014, 02:18 AM

If you get the hybrid bulkheads from FLM there's plenty of build thread explaining what Diffs you can use in the bulkheads on this forum.
Its a good option once you've shimmed the 1/8 Diffs to the bulkheads properly.
I personally prefer to go with the UE Diffs with GA 7075 or 6061 bulkheads. The UE Diffs pop up on eBay from time to time. Haven't checked the UE store to see if the UE ultralite Diffs are in stock or not. Definitely more expensive to go with the UE Diffs and GA bulks.

	(#11)
Justinbolin Hugo Stiglitz Offline Posts: 46 Join Date: Aug 2010 Location: Corona, Ca	06.10.2014, 02:18 AM If you get the hybrid bulkheads from FLM there's plenty of build thread explaining what Diffs you can use in the bulkheads on this forum. Its a good option once you've shimmed the 1/8 Diffs to the bulkheads properly. I personally prefer to go with the UE Diffs with GA 7075 or 6061 bulkheads. The UE Diffs pop up on eBay from time to time. Haven't checked the UE store to see if the UE ultralite Diffs are in stock or not. Definitely more expensive to go with the UE Diffs and GA bulks. [1] Gorillamaxx G4 w/Flexteks [1] Gorillamaxx G4 w/RacerX [1] Gorillamaxx G4 w/G3.3 "No one can resist my Schwetty balls"[/B]