RC-Monster Forums - View Single Post

RC-Monster Mike · 03.12.2015, 01:56 PM

The battery boxes are specific to the chassis, but could certainly bolt to any structure that has adequate mounting surface area. Internal dimensions are 49.4mm wide by 175mm long - external total dimensions are 55mm wide and 193mm long(approximate). There are 4 through holes to allow an M4 flat head screw to pass through and thread into the chassis - 2 centered on the ends and to on the inside edge of the ends(2 centers only would likely be adequate). The trays weigh 1.8oz each(machined from 10+ oz block) or 2 oz with the strap. They finish to .825" total height.

	(#15)
RC-Monster Mike Site Owner Offline Posts: 4,915 Join Date: Nov 2004 Location: PA	03.12.2015, 01:56 PM The battery boxes are specific to the chassis, but could certainly bolt to any structure that has adequate mounting surface area. Internal dimensions are 49.4mm wide by 175mm long - external total dimensions are 55mm wide and 193mm long(approximate). There are 4 through holes to allow an M4 flat head screw to pass through and thread into the chassis - 2 centered on the ends and to on the inside edge of the ends(2 centers only would likely be adequate). The trays weigh 1.8oz each(machined from 10+ oz block) or 2 oz with the strap. They finish to .825" total height.