RC-Monster Forums - View Single Post

Manne · 03:53 PM

Installed the Cen racing internals from the genesis/matrix, I did this not because I stripped the gears, but because I kept snapping the 2.5mm pin on each outputshaft. The Cen internals uses 3mm pins. Just drilled up the flux outputs from 2.5mm to 3mm. Strongly recomended!

:
Stock to the left:

And got a new Charger:

	(#15)
Manne RC-Monster Carbon Fiber Offline Posts: 163 Join Date: Mar 2010	03.18.2015, 03:23 PM Installed the Cen racing internals from the genesis/matrix, I did this not because I stripped the gears, but because I kept snapping the 2.5mm pin on each outputshaft. The Cen internals uses 3mm pins. Just drilled up the flux outputs from 2.5mm to 3mm. Strongly recomended!: Stock to the left: And got a new Charger: Last edited by Manne; 03.18.2015 at 03:53 PM.