RC-Monster Forums - View Single Post - Odd electronics behavior, delayed throttle & steering response

WheelMan · 02:23 PM

Awesome, some things I can try, thanks Brian. I appreciate the help. I will give these a shot & report back here with the results.

I know my XL2 has one of those ferrite donuts on the wires going to the receiver. But if my servo could benefit from one as well, I can certainly put one on there too.

I have some of that aluminum tape for duct work, that should work just like tin foil I assume? Should be the same thing. The sticky backing would just be handy for keeping it from coming off.

-Travis

	(#3)
WheelMan Do Epic Sh!t Offline Posts: 298 Join Date: Nov 2012 Location: Erie, IL	04.29.2015, 02:18 PM Awesome, some things I can try, thanks Brian. I appreciate the help. I will give these a shot & report back here with the results. I know my XL2 has one of those ferrite donuts on the wires going to the receiver. But if my servo could benefit from one as well, I can certainly put one on there too. I have some of that aluminum tape for duct work, that should work just like tin foil I assume? Should be the same thing. The sticky backing would just be handy for keeping it from coming off. -Travis Adults are just kids, with money. Common sense, is not so common. Last edited by WheelMan; 04.29.2015 at 02:23 PM.