RC-Monster Forums - View Single Post - shock set-up

**shock set-up -** 04.09.2006, 12:10 AM

front shocks seem to act/respond good, take a load and rebound to desired position.....

rear shocks start out up high, with throttle they lower substanially (torque ???) but then they stay down (a-arms level) and dont rebound, landing from a small (2-3 feet high jump rear skid bottoms and rear end stays low, will not rebound back up....

any suggestions, weak spring rate? need thinner/thicker oil? need better shocks? change oil piston?

what im running....... T-MAXX with INTEGY upper/lower arms, shock mounts, shocks....

MSR4 Shock w/ Piggyback for E/T-Maxx (NEW)

	(#1)
furryninjas Guest Posts: n/a	shock set-up - 04.09.2006, 12:10 AM front shocks seem to act/respond good, take a load and rebound to desired position..... rear shocks start out up high, with throttle they lower substanially (torque ???) but then they stay down (a-arms level) and dont rebound, landing from a small (2-3 feet high jump rear skid bottoms and rear end stays low, will not rebound back up.... any suggestions, weak spring rate? need thinner/thicker oil? need better shocks? change oil piston? what im running....... T-MAXX with INTEGY upper/lower arms, shock mounts, shocks.... MSR4 Shock w/ Piggyback for E/T-Maxx (NEW)