RC-Monster Forums - View Single Post

jcflyer · 10:17 PM

Ok I tried everything and took measurements the front two holes are 1/2mm off. There is no getting around it, if you try to enlarge the big square hole then the two rear screws won't line up. Another plate is what's needed with the holes in the proper place!!

	(#5)
jcflyer RC-Monster Carbon Fiber Offline Posts: 68 Join Date: Apr 2016	04.25.2016, 09:13 PM Ok I tried everything and took measurements the front two holes are 1/2mm off. There is no getting around it, if you try to enlarge the big square hole then the two rear screws won't line up. Another plate is what's needed with the holes in the proper place!! Last edited by jcflyer; 04.25.2016 at 10:17 PM.