RC-Monster Forums - View Single Post

Mike.L · 07:35 PM

Hey everyone,
im just about to recive my e-maxx in the mail tommorow(tuesday).
im running gp3300's on it, 7 cell/w deans plugs and the 12 ga ultra wire:030: the usual:027:

just bought them off sylvester for a nice/fair pirce. 50$ CAN
however one bar that connect to the cells had disconected but still attached to the other cells.

Sylvester tryed to salder them back together but didn't work out, so i took of the solder and taped up the battery nice and tight.
because i don't really like how the bars are exposed and scared me that when i get my gorilla maxx chassis in alunimum that they will short to metal to metal contact.
the cells seem to hold nice n' snug because i taped them up with hockey tape, seems to hold better then all the other tapes.

tell me what you think,:018:
the gp3300's with the tape and without
"pics of my e-maxx will come in tommorow.":004:

	(#1)
Mike.L RC-Monster Titanium Offline Posts: 1,256 Join Date: Jan 2006 Location: Canada	Tell Me What You Think. - 04.17.2006, 07:33 PM Hey everyone, im just about to recive my e-maxx in the mail tommorow(tuesday). im running gp3300's on it, 7 cell/w deans plugs and the 12 ga ultra wire:030: the usual:027: just bought them off sylvester for a nice/fair pirce. 50$ CAN however one bar that connect to the cells had disconected but still attached to the other cells. Sylvester tryed to salder them back together but didn't work out, so i took of the solder and taped up the battery nice and tight. because i don't really like how the bars are exposed and scared me that when i get my gorilla maxx chassis in alunimum that they will short to metal to metal contact. the cells seem to hold nice n' snug because i taped them up with hockey tape, seems to hold better then all the other tapes. tell me what you think,:018: the gp3300's with the tape and without "pics of my e-maxx will come in tommorow.":004: Attached Thumbnails Last edited by Mike.L; 04.17.2006 at 07:35 PM.