RC-Monster Forums - View Single Post

sjcrss · 04.21.2006, 04:37 PM

instead of cutting away the shrink wrap on the controller...to pull away the black jumper...why don't you just pull the center wire out of the plug coming from the controller.....that's what I did along time ago....and I run a seperate rx pack to controller the servo's ect......and I've never had a problem......also this way is alot easier than removing the black jumper.....

	(#15)
sjcrss Hyper 7 Erevo Center Diff Offline Posts: 1,195 Join Date: Dec 2005 Location: CNY (Syracuse/Binghampton area)	04.21.2006, 04:37 PM instead of cutting away the shrink wrap on the controller...to pull away the black jumper...why don't you just pull the center wire out of the plug coming from the controller.....that's what I did along time ago....and I run a seperate rx pack to controller the servo's ect......and I've never had a problem......also this way is alot easier than removing the black jumper.....