RC-Monster Forums - View Single Post

sjcrss · 07:19 PM

no doubt....it says....one plug is a charge jack...which looks to be the red square plug...the other red plug goes into the reciever..and the black one goes to the battery.........just hardwire the batt in place of the black plug and you should be good to go....open up the switch housing to make sure the red square plug is for charging....but I'm 99% sure it is.........did you find some 3mm screws for the strobe slipper yet?.....also by any chance do you have msn instant messanger or aim.....then I can walk you thru everything easier

	(#18)
sjcrss Hyper 7 Erevo Center Diff Offline Posts: 1,195 Join Date: Dec 2005 Location: CNY (Syracuse/Binghampton area)	04.24.2006, 07:17 PM no doubt....it says....one plug is a charge jack...which looks to be the red square plug...the other red plug goes into the reciever..and the black one goes to the battery.........just hardwire the batt in place of the black plug and you should be good to go....open up the switch housing to make sure the red square plug is for charging....but I'm 99% sure it is.........did you find some 3mm screws for the strobe slipper yet?.....also by any chance do you have msn instant messanger or aim.....then I can walk you thru everything easier Last edited by sjcrss; 04.24.2006 at 07:19 PM.