RC-Monster Forums - View Single Post

Batfish · 04.25.2006, 02:03 PM

It has been mentioned already, but the most likely culprit for a slow steering servo (aside from a slow servo) is using the built-in BEC from any non-Novak controller. They all provide 5V for the BEC, whereas an external BEC (UBEC), the Novak HV-Maxx, or a standard receiver pack all provide 6V for the BEC. This makes a HUGE difference in the servo speed and torque.

	(#11)
Batfish RC-Monster Aluminum Offline Posts: 617 Join Date: Apr 2005 Location: MA	04.25.2006, 02:03 PM It has been mentioned already, but the most likely culprit for a slow steering servo (aside from a slow servo) is using the built-in BEC from any non-Novak controller. They all provide 5V for the BEC, whereas an external BEC (UBEC), the Novak HV-Maxx, or a standard receiver pack all provide 6V for the BEC. This makes a HUGE difference in the servo speed and torque. Joe Electronics run on smoke... if you let the smoke out, they stop working.