Thanks for your answer.
Quote:
|
Originally Posted by Serum
1950/6 is too hot for 6S lipo imo. my wanderer/feigao 7XL preforms the same as a bigmaxximum, only being smoother (the wanderer is smoother) the schulze conrollers are quite harsh compared to the quark or the MGM. In your choice of the motor; it's wiser to take a lower KV rating. a 1950/8 or 9 would make more sence on 6S lipo.
|
Yes, you are probably right.
Quote:
|
Originally Posted by Serum
I wouldn't take the bigmaxximum, i like the Lehners, and besides, with a lehner (2pole) you don't need a schulze controller. you can take a quark 125, MGM or BK. The bigmaxximums look good, but you don't want a BL setup, just for the looks, right!?
|
The fact is I already have a Schulze Future 18.97.
Quote:
|
Originally Posted by Serum
if you are looking for a mean and nimble racer, with incredible acceleration, you might even consider the 1930. it will spin up faster than a bigger/larger rotor. I currently have got a basic XL in one of my maxxes, (XL2400) and on 3S lipo, it weights 3.2 kg and it really jumps off when it comes to acceleration.
|
Just with 3S ? Interesting.
Quote:
|
Originally Posted by Serum
For lipo's you might consider getting the new formulation of the flightpowers. Daniel (dafni) has got them too. With the maxxamps lipo's he had nothing but trouble, and with these flightpowers, it's untamable.
|
Probably I will buy some flightpower EVO 20C. They will surclass my thunder Power 15C.
My fear is that the Lehner will be less flexible than the pltty about the input
voltage. I think the pletty will run all right from 4S to 6S. The Lenher seems
to me to be all right only with the really right voltage.
Is this just an impression ?
So:
pletty: 0
lehner: 1
Ciao,
Daniele