[sjcrss]

I've been in brushless way back when Modeltech was around, and back then you just pulled the red wire...and didn't even pull the black jumper. I've never heard of doing both, but I have heard of doing one or the other.....In my case ...because the MIcro's are programmable via a pc.....pulling the black jumper wasn't a option for me...so I made a short servo lead with the red wire missing...and then I plugged in my controller lead into it....that way all i had to do was unplug it and I could program my controller.....but still have the BEC disabled when I plugged it into my lead with the red wire missing. I hope this helps.