View Single Post
Old
  (#2)
RCcarnut
RC-Monster Carbon Fiber
 
Offline
Posts: 57
Join Date: Feb 2005
Location: New Hampshire
04.12.2005, 07:52 AM

Quote:
Just one question though, seemed like the motor ran a little on the warm side for the gearing, read 125-130 on my temp gauge and the 7 cell pack GP3300s read 160-165.

The motor temps sounds ok. The battery seems way too hot. How are they built? If it is a cheaply built GP stick pack then rebuilding it to side X side with probars should help lower the temps on it.

I used to run a stick pack back when I bought my first brushless(Novak SS) . The battery used to get really hot. I rebuilt it to side x side and it was fine. Now I only use hand made packs.

I run my lehner 5300/9918 in my bandit right now , and with these side x side packs , the battery gets warm only. The motor gets hot though but it stays within a safe range.

Last edited by RCcarnut; 04.12.2005 at 08:34 AM.
   
Reply With Quote