RC-Monster Forums - View Single Post

Gustav · 07.11.2006, 02:59 PM

Pretty much any BL system will kill the stock idler gears on the e-maxx,Mike has steel ones in the store which are a necessity really.

you could just get the idlers and run the stock sliders if it's a mild enough system or a light weight build but i'd recommend getting 3.3 sliders, knuckles and arms from an ebay chop shop,preferable to cvds IMO since they're cheap and plentiful and equally good.Other than that you can either run the stock slipper locked down or run the strobe slipper.

The mildest system i know of for the maxx is the Novak hv-maxx but alot of people seem to have thermalling problems with it.a fiegao 10l on 12 cells might be fairly mild but still more than the hv-maxx.

	(#2)
Gustav RC-Monster Aluminum Offline Posts: 916 Join Date: Jul 2005 Location: UK	07.11.2006, 02:59 PM Pretty much any BL system will kill the stock idler gears on the e-maxx,Mike has steel ones in the store which are a necessity really. you could just get the idlers and run the stock sliders if it's a mild enough system or a light weight build but i'd recommend getting 3.3 sliders, knuckles and arms from an ebay chop shop,preferable to cvds IMO since they're cheap and plentiful and equally good.Other than that you can either run the stock slipper locked down or run the strobe slipper. The mildest system i know of for the maxx is the Novak hv-maxx but alot of people seem to have thermalling problems with it.a fiegao 10l on 12 cells might be fairly mild but still more than the hv-maxx.