RC-Monster Forums - View Single Post

joeling · **Quark Monster Pro Error Question -** 07.16.2006, 09:55 AM

Hi,

I am running a Quark Monster Pro with 7XL & 4S (20C 3200mah) lipo on my buggy. Gearing is 12/46. After a few laps, the esc started to become unresponsive. I still have full control of the steering servo. When I checked, I found that the amber LED on the esc was lit continuously at neutral. After I triggered the brake, this seemed to reset the esc & it was ok for a while. Then, the whole episode repeated. Could anyone tell me what error code did the amber LED on the esc signify ? I am guessing momentary over current as the temp. on the esc was around 80 deg C & the motor temp. reading was around 70 deg C only. Any idea ?

Regards,
Joe Ling
Malaysia

	(#1)
joeling RC-Monster Carbon Fiber Offline Posts: 463 Join Date: Aug 2005 Location: Malaysia	Quark Monster Pro Error Question - 07.16.2006, 09:55 AM Hi, I am running a Quark Monster Pro with 7XL & 4S (20C 3200mah) lipo on my buggy. Gearing is 12/46. After a few laps, the esc started to become unresponsive. I still have full control of the steering servo. When I checked, I found that the amber LED on the esc was lit continuously at neutral. After I triggered the brake, this seemed to reset the esc & it was ok for a while. Then, the whole episode repeated. Could anyone tell me what error code did the amber LED on the esc signify ? I am guessing momentary over current as the temp. on the esc was around 80 deg C & the motor temp. reading was around 70 deg C only. Any idea ? Regards, Joe Ling Malaysia