RC-Monster Forums - View Single Post

go4gold · 09:37 PM

The black jumper is for the internal bec. Jumper on=internal bec enabled and jumper off=not using internal bec. One other thing to check is the 2 pins that are sticking out after you remove the red jumper. Make sure they are not touching each other or something metal. Hope this helps some. I would also cheack all the connectionson the motor and esc

	(#6)
go4gold mod emaxx Offline Posts: 124 Join Date: Jul 2006 Location: Vacaville, California	07.17.2006, 09:35 PM The black jumper is for the internal bec. Jumper on=internal bec enabled and jumper off=not using internal bec. One other thing to check is the 2 pins that are sticking out after you remove the red jumper. Make sure they are not touching each other or something metal. Hope this helps some. I would also cheack all the connectionson the motor and esc So many toys and so little time Last edited by go4gold; 07.17.2006 at 09:37 PM.