RC-Monster Forums - View Single Post

neweuser · 07.17.2006, 10:24 PM

My drive train is great! My 10xl/9920 only got hot when i used my 20T pinion, my 18T pinion was great! But my drive train has no binding at all. I spent two weeks adjusting it over and over. When i did my UE diffs, i made sure! trust me a couple hundred dollars in diffs alone, and the the UE cvd's, all that, i made sure. with the quark, i checked a triple checked all my connections. if i doubted them, i redid them using 3 sets of deans! It's the controller, my motor is great! temps are real low, lower than my 10xl even!
BrainG - so you can run consistantly? i just bashed around lightly and it thermalled! I don't see how anyone can run Lipo with these at all!

	(#7)
neweuser RC Monster, the Final Frontier Offline Posts: 3,379 Join Date: Feb 2006 Location: Minnesota	07.17.2006, 10:24 PM My drive train is great! My 10xl/9920 only got hot when i used my 20T pinion, my 18T pinion was great! But my drive train has no binding at all. I spent two weeks adjusting it over and over. When i did my UE diffs, i made sure! trust me a couple hundred dollars in diffs alone, and the the UE cvd's, all that, i made sure. with the quark, i checked a triple checked all my connections. if i doubted them, i redid them using 3 sets of deans! It's the controller, my motor is great! temps are real low, lower than my 10xl even! BrainG - so you can run consistantly? i just bashed around lightly and it thermalled! I don't see how anyone can run Lipo with these at all! "if you've got something to say, say it peacefully"