RC-Monster Forums - View Single Post

crazyjr · 07.20.2006, 11:05 PM

I used two screws and some spacers to elimate reverse and took out all the slack. I used 2 2x10mms crews into drilled holes in the cog by my dremel, then i spacered the shaft so it would not move around. I did the same thing to my E-maxx tranny to eliminate first gear, but used 3x12mm screws

	(#12)
crazyjr RC-Monster Dual Brushless Offline Posts: 3,794 Join Date: May 2005 Location: georgia	07.20.2006, 11:05 PM I used two screws and some spacers to elimate reverse and took out all the slack. I used 2 2x10mms crews into drilled holes in the cog by my dremel, then i spacered the shaft so it would not move around. I did the same thing to my E-maxx tranny to eliminate first gear, but used 3x12mm screws Work because i gotta, play because i wanna People here hate Nitro, I love it. I start it, run it about 50 ft from me and it dies, I go after it. Perfect exercise