RC-Monster Forums - View Single Post

jhautz · 12:00 PM

The flats on the output shaft are actually bottoming on the opening for the driveshaft. The only thing I can figure is there are diferent yokes for the t-maxx and the revo, even though the traxxas website shows the identicle part numbers.

I can grind some material out of the opening on the driveshaft to get it to go on far enough to line the holes up, but then the shaft rubs on the diff case.

This should be simple. Its starting to really p**s me off.:mad:1

	(#42)
jhautz RC-Monster Mod Offline Posts: 4,217 Join Date: Apr 2006 Location: Chicago, IL	07.24.2006, 11:56 AM The flats on the output shaft are actually bottoming on the opening for the driveshaft. The only thing I can figure is there are diferent yokes for the t-maxx and the revo, even though the traxxas website shows the identicle part numbers. I can grind some material out of the opening on the driveshaft to get it to go on far enough to line the holes up, but then the shaft rubs on the diff case. This should be simple. Its starting to really ps me off.:mad:1 I can't decide if its more fun to make it... or break** it... Silent...But Deadly Last edited by jhautz; 07.24.2006 at 12:00 PM.