RC-Monster Forums - View Single Post - G-maxx Conversion

T2693 · 02:20 AM

What's up everyone

Just finishing my conversion from stock setup to custom. Here's a break down of the parts I upgraded so far.

G-maxx G2 CF chassis EXT
G-maxx G3 suspension
G-Maxx G2 X Brace motor mount (waiting for BL, ;) to install )
Fastlane Front/Rear Bulkheads
RPM Bulkhead Braces
RPM skid/wear plate (front/rear)
RPM Knuckles
RPM Bumpers (front/rear)
Proline Power Stroke Shocks
Integy AL diff case
Integy Gear Box Collar
Maximizer AL Diff cups
RD Logic Maxx 2.5 Cvds
UE TI Drive Shafts
Traxxas Talon Tires & Gemini RIms

Had a couple questions on a few items that I'll need, some sooner then later, lol.

Battery Padding: For those with G-maxx chassis, Do you use the padding, does it help, etc?

Servo Saver: UE version any good? Think Andy has it on his truck, what's the word on it?

Front Skid Plate: Currently using stock, what's good?

Turnbuckles: Currently using stock, what's good?

Body: Stock won't fit with EXT chassis. What will fit?

Body posts: Need replacement, noticed I have a crack in my stock post so what's good?

I'll be updating to the single speed conversion once released, along with a better radio and servo, compared to stock.

I wanted to give a special thanks to RC Monster Mike for helping me out during my rebuild and I also wanted to thank everyone here for their input on parts, etc. THANKS!

	(#1)
T2693 RC-Monster Carbon Fiber Offline Posts: 112 Join Date: Mar 2005 Location: Newburgh, NY	G-maxx Conversion - 04.23.2005, 02:12 AM What's up everyone Just finishing my conversion from stock setup to custom. Here's a break down of the parts I upgraded so far. G-maxx G2 CF chassis EXT G-maxx G3 suspension G-Maxx G2 X Brace motor mount (waiting for BL, ;) to install ) Fastlane Front/Rear Bulkheads RPM Bulkhead Braces RPM skid/wear plate (front/rear) RPM Knuckles RPM Bumpers (front/rear) Proline Power Stroke Shocks Integy AL diff case Integy Gear Box Collar Maximizer AL Diff cups RD Logic Maxx 2.5 Cvds UE TI Drive Shafts Traxxas Talon Tires & Gemini RIms Had a couple questions on a few items that I'll need, some sooner then later, lol. Battery Padding: For those with G-maxx chassis, Do you use the padding, does it help, etc? Servo Saver: UE version any good? Think Andy has it on his truck, what's the word on it? Front Skid Plate: Currently using stock, what's good? Turnbuckles: Currently using stock, what's good? Body: Stock won't fit with EXT chassis. What will fit? Body posts: Need replacement, noticed I have a crack in my stock post so what's good? I'll be updating to the single speed conversion once released, along with a better radio and servo, compared to stock. I wanted to give a special thanks to RC Monster Mike for helping me out during my rebuild and I also wanted to thank everyone here for their input on parts, etc. THANKS! Last edited by T2693; 04.23.2005 at 02:20 AM.