RC-Monster Forums - View Single Post

RC-Monster Mike · 08.02.2006, 10:23 AM

Yes, spacing the drive shafts with a small bit of fuel tubing will properly center the shafts inside the cups. The shafts are a little short to facilitate removing the tranny without disassembling the front or rear of the truck.

	(#2)
RC-Monster Mike Site Owner Offline Posts: 4,915 Join Date: Nov 2004 Location: PA	08.02.2006, 10:23 AM Yes, spacing the drive shafts with a small bit of fuel tubing will properly center the shafts inside the cups. The shafts are a little short to facilitate removing the tranny without disassembling the front or rear of the truck.