RC-Monster Forums - View Single Post - Brushless Thunder Tiger ST-1

MetalMan · 08.11.2006, 12:31 PM

You might want to ditch the receiver boxes and mechanical brakes. A 5s2p pack would be 54mm (2 1/8") tall, and would be better off split up, with a 2s2p on the motor side and a 3s2p on the right side (IMO).
If you do go with 5s, you might want a slower motor, with a kv around 1800-2000. There is the Neu 1515/2.5D, which has a kv of 1700.

	(#3)
MetalMan RC-Monster Mod Offline Posts: 5,297 Join Date: Mar 2005 Location: SoCal	08.11.2006, 12:31 PM You might want to ditch the receiver boxes and mechanical brakes. A 5s2p pack would be 54mm (2 1/8") tall, and would be better off split up, with a 2s2p on the motor side and a 3s2p on the right side (IMO). If you do go with 5s, you might want a slower motor, with a kv around 1800-2000. There is the Neu 1515/2.5D, which has a kv of 1700. SH Z-Car, Custom Crawler, 8s Savage, 12s XTM XLB 1/7 buggy, 4wd 4-link rear/IFS Pro4 truck, Custom Hyper 10 Short Course, Belt-Drive Mammoth ST 1/8 truggy, 4s 17.5 MM Pro HPI Blitz