RC-Monster Forums - View Single Post

Gustav · 02:09 AM

I'm sending mine to MGM,i'm in europe so it shouldn't take long.
They told me the update will solve the problem as has Mike,MGM said it was only a problem for certain motors.
If you have two,i'd send one away for the update and use the other in the mean time with the range of neutral zone at the highest setting,and maybe some throttle deadband on the transmitter,it reduces the effect greatly (since it's not braking the motor to such a low speed).
Downside being the large deadband on the throttle which is more on/off so you don't have fine throttle control,not ideal when you have a 2280.
i.e 1/4 throttle will be about the lowest.

	(#10)
Gustav RC-Monster Aluminum Offline Posts: 916 Join Date: Jul 2005 Location: UK	08.31.2006, 02:07 AM I'm sending mine to MGM,i'm in europe so it shouldn't take long. They told me the update will solve the problem as has Mike,MGM said it was only a problem for certain motors. If you have two,i'd send one away for the update and use the other in the mean time with the range of neutral zone at the highest setting,and maybe some throttle deadband on the transmitter,it reduces the effect greatly (since it's not braking the motor to such a low speed). Downside being the large deadband on the throttle which is more on/off so you don't have fine throttle control,not ideal when you have a 2280. i.e 1/4 throttle will be about the lowest. Last edited by Gustav; 08.31.2006 at 02:09 AM.