RC-Monster Forums - View Single Post - DIY Project E-Revo 3.3 Brushless.

jesi · 09.13.2006, 01:00 PM

glassdoctor:
yeah, maybe 20t pinion is good.
Motor is 20XL07, here is info:
http://www.bk-electronics.com/catalo...oducts_id=1502.
I just received my esc, so i dont know yet, more testing...

Serum:
Thanks!
Here is some pics: http://jesi.5cyl.net/RC/e-revo/
Battery holder is next todo.
:), i do have speedcontroller =)
Hmm, i think i have stock e-maxx gearing, 18t/66t. I have many pinions for 1/8" shaft, but just one for 5mm shaft. Must order some from Mike.
Ecs is bout hand warm, motor 140-176F (that is bad thing, i say).

Here is two other project cars:
http://jesi.5cyl.net/RC/e-hyper/
Just dont have spare time =(

What u say, is LB5000XL better?
And which give more run time, 2100kv motor @ 16.8v, or 4200kv motor @ 8.4v?

	(#1)
jesi RC-Monster Stock Offline Posts: 15 Join Date: Sep 2006 Location: Tampere, Finland.	09.13.2006, 01:00 PM glassdoctor: yeah, maybe 20t pinion is good. Motor is 20XL07, here is info: http://www.bk-electronics.com/catalo...oducts_id=1502. I just received my esc, so i dont know yet, more testing... Serum: Thanks! Here is some pics: http://jesi.5cyl.net/RC/e-revo/ Battery holder is next todo. :), i do have speedcontroller =) Hmm, i think i have stock e-maxx gearing, 18t/66t. I have many pinions for 1/8" shaft, but just one for 5mm shaft. Must order some from Mike. Ecs is bout hand warm, motor 140-176F (that is bad thing, i say). Here is two other project cars: http://jesi.5cyl.net/RC/e-hyper/ Just dont have spare time =( What u say, is LB5000XL better? And which give more run time, 2100kv motor @ 16.8v, or 4200kv motor @ 8.4v?