RC-Monster Forums - View Single Post - Worth upgrading from a 9920 to a Quark 125?

Rtsbasic · 12:44 PM

Using a 6v UBEC, which works fine - no stuttering on servo's. It only stutters going to WOT immediately, if I ease it in over the space of a second or so its fine. Its also fine pulling away to a medium speed, although it does cog for that split sec.

Caps aren't leaking, although there are only two on my model. 650uF 50v ones I think, not 100% though. One is easier to move around than the other, perhaps its become disconnected.

Btw do you know if the 9920 has thermal cut off? I've never encountered it so I presume it doesn't?

	(#19)
Rtsbasic RC-Monster England! Offline Posts: 425 Join Date: Jun 2005 Location: North Devon, England	09.28.2006, 12:43 PM Using a 6v UBEC, which works fine - no stuttering on servo's. It only stutters going to WOT immediately, if I ease it in over the space of a second or so its fine. Its also fine pulling away to a medium speed, although it does cog for that split sec. Caps aren't leaking, although there are only two on my model. 650uF 50v ones I think, not 100% though. One is easier to move around than the other, perhaps its become disconnected. Btw do you know if the 9920 has thermal cut off? I've never encountered it so I presume it doesn't? Last edited by Rtsbasic; 09.28.2006 at 12:44 PM.